Buffer circuits for digital cmos

See Other projects in : DigitalsSimple Circuits
 And:

  Posted by momename - June 3, 2012 at 1:06 pm

circuit output buffer by IC 4050
If you want the circuit Output buffer for the circuit digital. I begs for to advise IC 4050 (Hex buffers with high-to-low level shifter inputs) because very be IC that be usable easily. use link up digital circuit TTL and CMOS well.

The family of CMOS digital ICs have many strengths. It can be used to power a 3-16V, Easy and cheap. It has the same frequency is not high. Slow response that IC – TTL applications are easy to use and cheap. Slow response to IC – TTL applications. The problem that I found as the current is low. Do not apply to other circuits or the load current is greater than 50mA. However, we have several ways to increase the buffer circuit such the transistor and a buffer circuit. This circuits continues on this issue, we use the IC 4050 is characterized by several parallel butter gate. However, we have several ways to increase the buffer circuit. May be uses transistor and a buffer IC circuit.

In this circuit, the answer to this problem, we use the IC 4050 is characterized by several parallel butter gate. Normally single gate circuit can supply up to about 15mA. When we put the gate parallel together will be help Increases the current very well. The circuit is in highly stable up.

Buffer-circuits-for-digital-cmos.jpg