Here is circuit 9V power supply regulator with battery 12V backup system.
Use IC 7812 and 7805 control voltage output by R3 1K output 9V 1A max.
This is a 9V power supply which will work even on power failure. It uses a rechargeable battery and regulators. A transformer with 15-0-15 AC volts output is required. In the first regulator U1 the output is lifted up by 1.4V and in the second regulator U2 by a resistor divider. In the second regulator the voltage across resistor R3 is 5V, so the current is 5V / 1K = 5mA this adds to the quiescent current of 5mA from the regulators ground terminal and flows into the resistors R1 and R2 in parallel which form 404 ohms, 10mA thru 404 ohms is 4V. So the output will be 5 + 4 = 9V. Note that the charge and discharge paths of the battery are separated with diodes.
Source:http://schematics.blogspot.com/2004/10/battery-backup-supply.html
Thank you.
Related Links
More Circuit about 7812 voltage regulator
More Circuit about 7805 regulator
More circuit Battery Backup Supply
6V backup battery power supply regulator with IC 7805
Regulator 5V,6V,9V,12V 1A By IC 7805,7806,7809,7812
7805+Mj2955 power supply 5V 5A for digital circuit.
Regulator 12V 10A by IC 723+2N3055
top LM317 regulator
This entry was posted on Saturday, September 8th, 2007 at 7:35 pm and is filed under Power supply.
