Automatic Lamp Control with Light Sensitive Switch

The circuit above is an automatic switch which functions in absence of light. The IC 4060 works as an oscillator and the generated signal is applied to the base of T4 transistor. Phototransistor T3 is in conduction by existance of light and it keeps the T5 transistor’s base at ground potential.

When no light reachs the phototransistor, it gets in insulation. T3 reachs positive potential through 22kohm. T4 and T5 both gets in conductance. The oscillator signal reachs the optic coupler and lamp(s) shines.

Source: http://www.circuit-projects.com/automatic-lamp-control-withlight-sensitive-switch.html
Thank you.

Simple Light Actuated Relay by Phototransistor
The Sun - Up Relay Switch can be used to provide a audible switch for when the sun comes up. It can also be used to detect a light beam, headlights etc. This circuit is easy because it used ...
Light Dark Detector Alarm by IC 555
Today we come to see the circuit detects the light by have a voice warn. When meet the light or be become dark depend on using S1 ( follow the circuit ). For this my circuit uses the integra ...
Automatic Light Controller Using 7806
Voltage regulator ICs (78xx series) provide a steady output voltage, as against a widely fluctuating input supply, when the common terminal is grounded. Any voltage about zero volt (ground) co ...
Vehicle Interior Lighting With Switch-Off Delay
Nowadays, a switch-off delay for the vehicle interior lighting is a naturally a standard feature. However, with certain models having only spartan ?ttings, or older-model vehicles, you’re left ...
Light Actuated Relay Circuits by Photo Transistor
The Light Actuated Relay Circuit be office circuit with the light. The prominent point of this circuit be meet the light has fast more using LDR control circuit the very. When the light ...