The basic operation is essentially that of 2 separate photo sensor circuits in pairs. Each separate sensor circuit has a control pot to set it’s sensitivity for bright sunlight.
It is important to have a thorough understanding of the operation of the circuit in order to be successful in making the correct adjustments for acceptable operation. One must do the adjustments on a clear cloudless day. At the very least wait until the sun is between clouds.
CdS cells have a wide variance in the resistance they exhibit in bright sunlight. Generally the resistance is too low for this type of circuit. I have found that the CdS cells can be modified to have higher resistance by painting the cells with a black marker. I use a Sharpie black permanent marker. I paint this on all sides and edges. If you get too much on it can be removed with fingernail polish remover or acetone.
Read More Source:http://www.redrok.com/electron.htm#led3x
Thank you.
Related Links
More circuit Lighting Senser
More about Circuit Switches
More Circuit about Solar cell
More Circuit about solar cell system
Auto Charger battery 12V with PCB by IC 741
Simple Charges Lead-Acid Batteries by MAX773
Portable USB Charger (Version 2.0)
Auto Fast Battery Charger by LM311 for CAR
Solar Powered Reading Lamp by LM2941
Solar Regulator by 2N3906
This entry was posted on Wednesday, November 28th, 2007 at 7:59 am and is filed under Electronic Control, mobile phone.
