300-3000 MHz RF Detector
An RF detector with a dynamic range of 40 dB can now be obtained from Linear Technology (http://www.lineartech. com/pdf/5505i.pdf). The type LTC5505, housed in an SOT23 SMD package, can handle input frequencies between 300 MHz and 3 GHz for input signal levels between –32 dBm and +18 dBm (0 dBm = 1 mW into 50 ?). There are two versions having different input level ranges, as shown in the table.
Related Links
More circuit about RF
More circuit RF Modulator
More circuit RF Meter
Read More Source:
http://www.elektor.com/magazines/2002/july/
300-3000-mhz-rf-detector.55767.lynkx
Thank you.
Related Posts :
Building a square-wave oscillator using only three components is always a desirable accomplishment when space is tight, and if you can achieve a frequency range of 1 kHz to 30 MHz at the same time ...
Many beginners trying out their skill with QRP TX, for the first time have to overcome many problems before they are able to come on the air. On usual complaint is that, every thing is working ...
The circuit shown must represent the limits of simplicity for a metal detector. It uses a single 4093 quad Schmitt NAND IC and a search coil -- and of course a switch and batteries. A lead fro ...
A preamp that drives the CMOS counter input and a divide by 10 prescaler to extend the range of A Little More Serious Frequency Meter. The MCT10280 prescaler can be set to divide by 80, 40, 20 ...
The PTN78060 is a series of high-efficiency, buck-boost, integrated switching regulators (ISR) from good old Texas Instruments (TI). The caseless, double-sided package has excellent thermal charac ...
or 
