Simple and low cost. The optimal supply voltage is around 50V, but this amp work from 30 to 60V. The maximal input voltage is around 0.8 – 1V. As you can see, in this design the components have a big tolerance, so you can build it almost of the components, which you find at home. The and transistors can be any NPN type power transistor, but do not use Darlington types… The output power is around 60W.
Some comments:
- capacitor C1 regulates the low frequencies (bass), as the capacitance grows, the low frequncies are getting louder.
– capacitor C2 regulates the higher frequencies (treble), as the capacitance grows, the higher frequencies are getting quiter.
– this is a class B amplifier, this means, that a current must flow through the end transistors, even if there is no signal on the input. This current can be regulated with the 500? trimmer resistor. As this current incrases, the sound of the amplifier gets better, but the end transistors are more heating. But if this current decrases, the transistors are not heating so much, but the sound gets worse…
copy from : http://www.electronics-lab.com/projects/audio/042/index.html
thank you.
Related Links
More circuit about transistor amplifier
More circuit about 2n3055 amplifier
Amp OTL 100W by 2N3055 (with PCB)
40W Amp OCL 2N3055+MJ2955
Power Amplifier OCL 50W by 741+2N3055+MJ2955
Circuit Power Amp OCL 50w With LM3900, 2N3055
Power Amp OCL 100W by Transister MJ15003,MJ15004(with PCB)
50W Power Amplifier OCL Mosfet (K1058 + J162)
Power Amplifier ocl 60W by MOSFET K134 and J49 with PCB
Power Amplifier OCL 100W Mosfet J162 + K1058
This entry was posted on Thursday, April 19th, 2007 at 10:05 pm and is filed under Power Amplifier.
