25W RF amplifier by BLY88

25W RF amplifier by BLY88

RF amplifier with 25W of power for 88-108MHz FM transmitters.

Related Links
More circuit RF Amplifier
More circuit about RF
More circuit FM Antenna Amplifier
More circuit FM Transmitter
Linear FM 30Watt with BLY89
40 Watt Amplifier For FM Broadcast by MRF171A
RF Power Amplifier 1.3W to 6W by 2SC1970

Read More Source:

http://www.geocities.com/catfone/pa25w.htm

Thank you.

Related Posts :

  • RF Frequency Linear Tuning Varactors: MicroNote 705 from Microsem (PDF File) Related Links More circuit about RF More circuit FM Antenna Amplifier More circuit RF Amplifier More circui ...

  • The best place to put a pre-amplifier is with out a doubt as closest to the antenna as possible. If possible, directly mounted at the feeder (dipole) and using phantom-type powering of the amp ...

  • This amplifier was built based on Marconi's website, A Design for a 40W broadband VHF RF Power Amplifier for FM broadcast. A few minor tweaks were made to the schematic and a few parts were change ...

  • Input needs only several mWatts (e.g. BF900) -> 300 mWatts OUT. This schematic is a often used buffer. It's easy to build, clean and cheap. When you want even more power, you can replace th ...

  • This Power amplifier is equiped with a bipolar transistor,the famous MRF317 As lots of FM amplifier application ,the power transistor is in a C class bias. All the impedance networks (Input ...