24 Second Shot Clock by IC digital

Circuit :Milardo de Guzman
Email :Milardo de Guzman

Description:
This is a circuit intended to be used in basketball shot clock.

24 second shot clock

Notes:
To start in 24 seconds; 24s LOAD SW and Reset SW should be push simultaneously. If not, the count will start in 99. Pulse input can be connected to 555 astable multivibrator but must be calibrated for real time clock. The PAUSE SW must have a Switch Debouncer so that the counter will count normal when counting is paused and then turn-on.

When the count reach 00, the NOR gate will have an output of logic1 that will turn on the two transistor. The buzzer will rung and light will turn on. The two transistors are continuously turn-on not until LOAD SW and Reset SW is push. All have a +5v power supply.
source : http://www.zen22142.zen.co.uk/Circuits/Timing/24ssc.htm

PIC16F628 Digital Clock Timer
This clock timer uses a PIC16F628 microcontroller to display 3 and 1/2 digit time and control an external load. It can be programmed to time from 1 to 59 minutes. The clock includes a calendar ...
Real Time Clock PCF8583
The PCF8583 is a clock/calendar circuit based on a 2048-bit static CMOS RAM organized as 256 words by 8 bits. Addresses and data are transferred serially via the two-line bidirectional I2C-bus ...
LM8560 Digital Clock 24 Hr with alarm
If do you want clock timer cicuit. I like this Circuit LM8560 Digital Clock 24 Hr with alarm. It is small and easy all in one pcb. I used IC LM8560 Digital Alarm Clock, 40 pin volttage supply 9V ...
PIC16F84 Alarm Clock
This is an alarm clock I built. It was very effective during the sort time I used it, because I programmed it to play a very annoying tune through a speaker. I actualy started to wake up befor ...
LCD Clock-Calendar with 16F628
The reason why I'm using a LCD display is because it allow me to display many characters and it doesn't need to be "refreshed" as 7-segment Led displays. Also, the interface requieres less I/O pin ...