2-INPUT AUDIO MIXER by 2N3904

As simple as it gets. The mixer consists of two transistor-based preamplifiers. The first one (designated “Mike in”) offers higher gain. it works well with a regular dynamic microphone. The second one can be used to control audio input from a tape recorder/CD player.

Source:http://www.geocities.com/tomzi.geo/index.htm
Thank you.

Audio Mixer by FET 2N3819
This circuit be Audio Mixer Circuit by FET 2N3819 numbers, build easy and the a little equipment. By this circuit lets to use the microphone since two go up or use other tool all right ...
Microphone Mixer by 741
This relatively simple mixer was designed for three dynamic microphones, but can be re-designed for more or less. Level and tone controls are available to tailor the sound to your needs. Pa ...
6 Input Mixer by IC 741 , LF351 ,TL071
Description: A simple mixer with 3 line inputs and 3 mic inputs using commonly available parts. Notes: The mixer circuit below has 3 line inputs and 3 mic inputs. The mic inputs are suitable ...
Easy Audio Mixer by LM837
The mixer itself is a fixed-gain summing amplifier based on an LM837. It sums up all the six microphone preamp signals into a single output. This is called the MIX OUT, and is a rear-panel soc ...
Audio Mixer by 2N3819 Junction FET
This simple circuit mixes two or more channels into one channel (eg. stereo into mono). The circuit can mix as many or as few channels as you like and consumes very little power. The mixer is ...