This circuit provides 16 watts of amplification. it is built using two LM383 power audio amplifiers. use suitable heat sinks with the ic.
Part
U1 U2 LM383 8 watt audio amplifier ic
R1, R3 220 ohm resistor
R2, R4 2.2 ohm resistor
R5 1 megohm resistor
R6 100k audio taper potentiometer
C1, C7 10uf electrolytic capacitor
C2, C5 470uf electrolytic capacitor
C3, C4, C6 0.2uf ceramic capacitor
SPKR1 4 to 8 ohm speaker (up to 8 inches diameter)
Read More Source: http://www.reconnsworld.com/audio_16wattamp.html
Thank you.
Related Links
More circuit about Bridge amplifier
More Circuit car power amplifier
More circuit by IC LM383
More circuit about Mini Amplifier IC
More about Amplifier IC
Power Amplifier Mono BCL 20W by IC TDA2005
TDA2003 Amplifier BCL (low cost) 18W for CAR (with PCB)
Circuit Main Amp BCL 6w With LM380
Power Amp Super Bridge 120W by IC TDA2030
Bridge adaptor by NE5534
HA1377 Bridge Amplifier BCL cap 17W
Power Amplifier BCL 18W by IC TDA2009
Power Amplifier Super Small BCL 1.2W by IC TDA7052
This entry was posted on Monday, February 11th, 2008 at 2:34 pm and is filed under car power amplifier, Power Amplifier.
